Figure Stands For Marvel Legends
 

Hi, I was wondering if anyone could suggest which stands are good for Marvel Legends Figures and possibly where to pick them up. I was told the NECA stands were a good option - until I bought a pack and tried to use them only to find the ML foot holes are a tad big for the stand pins

Thanks and have a great day!

Re: Figure Stands For Marvel Legends
 

Bounty Hunter Toys in Hamilton here sold some good action figure stands that worked all right for ML. Call them and see if they still have them!

Phone: (905) 312-1621

Re: Figure Stands For Marvel Legends
 

Thanks, I'll check them out. Looking at the website tho, the disk stands look just like the neca stands I already have.

Re: Figure Stands For Marvel Legends
 

The KO Tamashii Stage Act 4 stands are great for ML. You can find them on aliexpress for around 2 - 4 Canadian each, they are same quality as the official bandai versions.

Re: Figure Stands For Marvel Legends
 

Looking for basic peg hole stands or flight/dynamic stands?

Can't vouch much for the basic style but if you are looking for flight stands AVOID the Neca ones as they don't have much play unless you want straight up and down (they also feel pretty cheap)...best option is the Mafex stand that unfortunately seems to only come packed with their figures or pick up the Tamashii stage act 4 for humanoid.

If you're looking for a cheap flight stand that can get the job done, try the variable action hero stand...not the best but it works.

Re: Figure Stands For Marvel Legends
 

Just looking for the basic stands to get them female characters to stay upright or to get some action poses from the fellas

Re: Figure Stands For Marvel Legends
 

For a basic peg stand I would recommend Marauder Gun Runners' IDS action figure stands. They have two pegs (one small and one large) so they fit almost any action figure out there. They're a bit of a tight fit for MLs, but they do work. Plus they're cheap(ish).

http://www.marauderinc.com/category-s/1836.htm

Re: Figure Stands For Marvel Legends
 

Look good. They work well with other 6 inch figures? (Black Series, WWE, DC Universe, MOTUC?)

Re: Figure Stands For Marvel Legends
 

Just checked out the site. Everything is 1:18 scale, would love to see a company focus on the 1:12 scale for all this stuff.

If they are geared towards the 3 3/4" figures, will the stands accommodate the peg holes in 6" figures?

Re: Figure Stands For Marvel Legends
 

They work on Hasbro MLs and the 6" SW Black for sure. I tried with some Guardians 2 figures and a Stormtrooper and they worked, but it was a tight fit. If the plastic was harder like NECA uses they wouldn't quite do it, but as the plastic has a bit of give they did pop in.

Toybiz MLs and NECA stuff, I tried and they don't work. Those other brands asked about, I don't have any to test out. Sorry.